Grill model: S3

99

BCK1002 Conversion Kit, LP to Natural Gas. Fits P3, P4, P3S, D3, D4. Includes:

• Two (2) B069003 NG manifolds with orifices
• One (1) NG12 12' Quick Disconnect Sturgis Hose Kit
• NG hose has 3/8" inside diameter
• One (1) conversion label B100033
• Gas conversion instructions

Note: Part BCK1002 is the factory authorized replacement for the following parts, which are no longer available:

• BM:B100244

MORE...

99

BCK1003 Conversion Kit, natural gas to LP. Fits P3, P4, P3S, D3, D4. Includes:

• Two (2) B069002 LP manifolds with orifices
• One (1) B069756 LP hose and regulator
• One (1) conversion label B100273
• Gas conversion instructions

Note: Part BCK1003 is the factory authorized replacement for the following parts, which are no longer available:

• BM:B100240

MORE...

99

DPA111 Stainless steel rod cooking grids for size 3 grill head (set of 2).

• Heavy gauge 8mm rod construction
• Restaurant quality stainless steel
• 2 piece set
• Fits: P3, D3, DU3, R3, U3, S3, G3, and R3.

Note: This is the same as part# B101281. Also replaces cast iron grid DPP103, which is no longer available.

Note: Part DPA111 is the factory authorized replacement for the following parts, which are no longer available:

• BM:B100467
• BM:B100468
• BM:B101270
• BM:B101281
• BM:B101282
• BM:DPP103

MORE...

?

CLA-AC0394 High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2" apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15" x 24".

• Top quality product
• Each briquette measure 2" x 2"
• Self cleaning
• Great heat distibution, retains heat longer
• Can be used on all grills that use briquettes or lava rock
• Use a single layer (multiple layers can reduce temperatures)

NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.

• 59 briquetes covers an area apprimately 15" x 24"
• 70 briquetes covers an area apprimately 17" x 26"
• 90 briquetes covers an area apprimately 17" x 33"

MORE...

?

03750 20" Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

03751 Universal adapter wire with male round and female spade connectors.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

34900 Double valve and manifold assembly for all Broilmaster up-front control natural gas models. Assembly includes left and right valve and manifold.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

52503-SS-X3 Premium stainless steel cooking grids for Broilmaster and Warm Morning grills. Set of three (3) grids. Fits size 3 grill heads (D3, G3, P3, S3, U3, etc.). Far superior to porcelain coated steel grids.

• Made in USA
• Commercial grade 304 stainless steel
• .225" solid stainless rods
• Sold as a set of three (3) panels MORE...

?

52503-SS Premium stainless steel cooking grid for Broilmaster and Warm Morning grills. Fits size 3 grill heads (D3, G3, P3, S3, U3, etc.). Far superior to porcelain coated steel grids.

• Made in USA
• Commercial grade 304 stainless steel
• .225" solid stainless rods
• Sold individually, 3 required. MORE...

?

DPP101-R Stainless steel bowtie burner and venturi assembly kit. Fits Broilmaster D3, P3, S3, U3 grill heads.

This burner is an exact duplicate of the original 21" OEM burner DPP101, and is made by the same manufacturer using the same materials as the original. The new official Broilmaster version of DPP101 is a 17" Bowtie burner MORE...

?

BQ-3A BBQ'er choice porcelain grill briquets. The finest available.

• Self-Cleaning Porcelain Briquettes.
• Made of fired porcelain for even heat transfer.
• Virtually indestructible.
• About 56 pieces covers approximately 310 square inches.
• Made in USA.

NOTE: MHP model TJK requires two (2) bags.
NOTE: This is an Aftermarket part, NOT an original factory part.

Note: Part BQ-3A is the factory authorized replacement for the following parts, which are no longer available:

• BQ-5

MORE...

?

CG-20SS Cooking Grid Stainless Steel Warm Morning G3
NOTE: This is an Aftermarket part, NOT an original factory part.

Note: Part CG-20SS is the factory authorized replacement for the following parts, which are no longer available:

• CG-20P

MORE...

?

DHK-3 Gasket kit. Round gasket fits all dual cast iron bowtie burners.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

IG-5B Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20" wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

WDLB+DV-8 Cast iron bowtie burner and venturi assembly kit. Includes:

• Cast iron burner
• One (1) DV-8 twin venturi
• All necessary gaskets and scews. MORE...

?

DPP101 Stainless steel bowtie burner and venturi assembly for P3, D3, DU, U3 and S3 grills manufactured after 2011. MORE...

?

00600 Aluminized steel radiation shield. Installs below burner in some Amberlight, TEMCO, Charbroil, and Broilmaster models.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

RSG3 Aluminized steel radiation shield for G3, G3TX, S3, and U3. See part RSGSS for high quality stainless version of this part.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

03500 36" wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

IG-18B 20" igniter wire with two (2) female spade connectors.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

03900 Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15" wire, and female round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only. Will NOT fit on cast iron burners.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

IG-5B Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20" wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

10602-725LR Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

62503 Cast iron "water fall style/mutliple level" cooking grids (set of 3).
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

BG-16 Rock grate for holding lava rock or ceramic briquettes.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

CG-20SS-X3 Premium quality stainless steel cooking grids. SET OF THREE (3). Far superior to the porcelain coated steel grids it replaces.

• Made in USA
• 304 commercial grade stainless steel
• .225 diameter solid stainless rods

• Each panel measures 16 7/8" x 8 3/8"
• Overall dimensions: 16 7/8" x 25 1/8"

.
NOTE: This is an Aftermarket part, NOT an original factory part.

Note: Part CG-20SS-X3 is the factory authorized replacement for the following parts, which are no longer available:

• CG-20P

MORE...

?

IG-15B Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

B072695 Stainless steel warming rack (Retract-A-Rack, Fold-Out). Fits C3, D3, P3, Q3, R3, T3. MORE...