broilmaster-gasgrillparts.com logo

Grill model: P4

FREE Shipping over $79 PlayButton
Broilmaster grill

Genuine Broilmaster factory replacement parts


Here's the parts we have for model P4
Home     Contact Us     Privacy Policy     Return Policy     Shipping Policy     About Us
Orders $79 and over get Free USA shipping

3
B072696 Stainless steel warming rack (Retract-A-Rack). Fits P4 and D4.

Note: Part B072696 is the factory authorized replacement for the following parts, which are no longer available:

  • B060757
MORE...

 
$56.36
4
WM-GRID3 Aftermarket premium grade solid stainless steel cooking grid with 1/4" rods for Broilmaster and Warm Morning (by Locke Stove) size 4 grill head. Fits: P4, D4, U4, G4. An economical alternative to the other available Broilmaster grids. These grids are comparable to Broilmaster's porcelain steel grids, which are no longer available.

Sold individually, two (2 required).
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$49.81
4
62203 Cast iron "water fall style/multiple level" cooking grids (set of 3). Porcelain treated, glossy finish.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$226.10
4
DPA112 Heavy duty stainless steel cooking grids for size 4 grill head.
  • Heavy gauge 5/16" stainless rods
  • Restaurant quality stainless steel
  • 2 piece set
  • Fits P4, D4, U4
  • Same as part B101320 (was sold individually)

Note: Part DPA112 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B101321
  • BM:DPA102
  • BM:DPP12
MORE...

 
$156.13
6
DPA107 Grid Lifter Kit. Also replaces kit part# B064539. NOTE: The photo of the part is currently incorrect. The manufacturer has changed the design to a one-piece 7" long 1 5/8" wide stainless-steel grid lifter with a round hanging hole on the handle end.

Note: Part DPA107 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B064539
MORE...

 
$27.92
8
B101061 Briquette Rack. Fits all size 3 grill head models. Manufacturer's Note: Some versions of this rack may include stainless steel extension brackets. See part DPA116 for Ceramic Flare Busters.

Note: Part B101061 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B063066
MORE...

 
$53.05
8
B906236 Burner Stabilizer Kit. Fits pre 2002 grills.

Note: Part B906236 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B906180
MORE...

 
$10.12
9
DPP112 Stainless Steel Bowtie Burner for P4X (Display Pkg)

Note: Part DPP112 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B100496
  • BM:B101513
MORE...

 
$107.84
10

B063065 Radiation Shield (Heat & Wind Deflector), Fits All Models. MORE...

 
$40.30
10
DPP7SS Genuine OEM stainless steel heat and wind deflection shield. Also replaces part# DPP6SS, B068977 and B063065.

Note: Part DPP7SS is the factory authorized replacement for the following parts, which are no longer available:

  • BM:DPP6SS
MORE...

 
$40.30
11
B057805 Bridge Pin, Fits all models. MORE...
 
$1.71
11A
B076789 Twin natural gas valve assembly. Fits P3/4 MORE...
 
$54.02
11B
B069002 LP Manifold W/Orifice, Fits P3, P4, D3, D4. Sold individually. See part number BKC1001 for set of two.

Note: Part B069002 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B056649
MORE...

 
$22.88
11B
B069003 NATURAL GAS Manifold W/Orifice, Fits P3, P4, D3, D4. Sold individually. See part number BCK1000 for set of two.

Note: Part B069003 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B056647
MORE...

 
$22.88
12
B057804 Hinge Pin, Fits all models. MORE...
 
$1.71
13
B069756 Hose and Regulator W/ Q.C.C. (female pipe fitting), fits all BRM LP models to 1999, SBG2500, 2501, 2801 MORE...

 
$29.48
13
DPA106 Adjustable Lid Stop Kit, All Models. Also replaces part #s B100421, B101231, B061281 and 061281.

Note: Part DPA106 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B076521
  • BM:B100421
  • BM:B101231
MORE...

 
$32.38
14
P182 Burner Orifice #55 (LP) MORE...
 
$11.74
15
B100098 Grill top height adjuster bar knob, Fits All Models (was B225). MORE...
 
$6.50
15
B100517 Plate, Orifice Mounting, Fits P3, P4, D3, D4.

Note: Part B100517 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B064787
MORE...

 
$6.41
15
B102492 Stainless steel lid handle. Requires mounting bolt holes to be on 21 inch centers. Includes mounting bolts. Overall length of the handle is 22 1/4" long. When using this handle to replace the longer 24" handle, drilling new holes is required.

Note: Part B102492 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B076313
  • BM:B076793
MORE...

 
$34.30
15
P265 Orifice, (NAT) (20, 000 BTU) Fits VFHS-20/10T; VFSM, VFSV, VFSR-30, H3XN, P4XN (all) MORE...
 
$10.12
16
B072218 Electronic ignitor head with two (2) male spade connectors. Fits 3/P4/P5/D3/D4
  • Uses 1 AA battery (not included)
  • Requires 7/8" mounting hole MORE...
 
$48.51
16
B073097 Foam Grip for S/S Handles, Fits P3, P4, P5. MORE...
 
$10.64
17
B067449 Briquet Rack - This briquette rack is porcelain enameled steel rods; however, there have been times when the manufacturer made these in stainless steel without a price difference. Fits P4/D4. See partDPA117 for Ceramic Flare Busters. MORE...
 
$41.75
17
B101420 VALVE Assy - LP. Uses orifice P182. MORE...
 
$33.12
18
WM-BRN2-8 Exact fit aftermarket cast iron Bowtie Burner and twin venturi assembly for older Broilmaster and Warm Morning (by Locke Stove) grills. This burner and curved venturi fits smaller grills with upfront controls. Known to fit D4, S4, U4, U5 models.
    Includes:
  • One (1) cast iron burner
  • One (1) plate steel twin venturi
  • All necessary gaskets and scews. MORE...
 
$144.11
18
B101421 VALVE Assy - NAT. Uses orifice P265. MORE...
 
$33.12
18
DPP101 Stainless steel bowtie burner and venturi assembly for P3, D3, DU, U3 and S3 grills manufactured after 2011. MORE...

 
$115.63
18
DPP102 Stainless steel burner and venturi assembly for D4, P4, U4, U5.
Also replaces part# B070435 and B100512.

Note: Part DPP102 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B070435
  • BM:B100512
MORE...

 
$115.63
18A
B100514 Twin Natural Valve Assembly (male flare fitting). Used on all grills built after 2002 (Except T and R Seies).
    Includes:
  • B100517 Manifold mounting plate
  • B069003 (2) natural gas manifolds with orifices
  • B076789 Dual valve assembly

Note: Part B100514 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B070502
MORE...

 
$95.62
18A
B100515 Valve - LP w/ Hose and Regulator fits P3, P4, D3, D4.
Also replaces part B070501, which has been discontinued by Broilmaster.

Note: Part B100515 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B070501
MORE...

 
$115.42
19
TG-2B Universal bolt-on heat indicator replaces most factory installed indicators with 1 1/2" bolt centers. Stainless steel case.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$11.95
19
B073963 Shelf Pin and Nut, Fits All Models MORE...
 
$3.35
19
B100446 Collector Box (Electronic Ignitor), electrode, and connector wire with female spade end. Please refer to DPP116 Kit if ground wire needed and two screws; does include sleeve # B069743. Fits P3/P4

Note: Part B100446 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B072701
MORE...

 
$27.72
19A
B100402 Collector box kit for P3/P4 and D3/D4 with electronic igniters.
 
$34.30
19B
DPP20 Electronic igniter kit.
 
$56.36
20
B070486 Stainless steel Handle (Handle Only) -- See B076793, Fits P4/D4.
Requires mounting bolt holes to be on 21 inch centers. The overall length of the handle is 22 1/4". When using this handle to replace the longer 24" handle, drilling new holes is required.

Note: Part B070486 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B100811
MORE...

 
$34.30
20
B100752 Control panel and label assembly, stainless steel (electronic ignitor), includes label and shield B100731. Fits P4

Note: Part B100752 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B073073
  • BM:B100153
  • BM:B100754
MORE...

 
$74.45
20
B101515 Control Panel and Label Assy, Stainless Steel fits P4X MORE...
 
$74.07
20
B101518 Stick-on control panel label for D4, P4, and other size 4 grills.

Note: Part B101518 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B072197
MORE...

 
$17.27
21
B069743 Collector Box Spacer, Fits P 3/4 D 3/4/5

Note: Part B069743 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B069343
MORE...

 
$4.68
21
B070084 Knob, Black (New Style), Fits P3/4/4, SR3, D3/4/5/2.
Also replaces part# B070286, which no longer available.
  • Off position D-Value: 3 o'clock
  • Knob diameter: 1 5/8"
  • Socket diameter: 5/16"
  • Knob shaft: 1/2"

Note: Part B070084 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B070286
MORE...

 
$10.12
23
B100731 Shield, Valve S/S, Fits D4-1 MORE...
 
$32.38
23
B101621 CONTROL PANEL SHIELD MORE...
 
$10.64
24
B069747 Ground Lug, Fits All Models MORE...
 
$3.21
24
B072684 Ground wire with female spade ends for battery-operated ignitors; 12" long. Fits All Electronic Models MORE...
 
$6.50
27
B100769 Bracket, shelf hold down.

Note: Part B100769 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B072017
MORE...

 
$6.50
28
DPA117 Flare Buster Flat Ceramic Pads; consist of ten pieces, three of which are different size pieces. For P4, H4, D4. Requires B067449 Rack if replacing flavor screen. MORE...
 
$75.17
29

DPA104 Stainless steel Flavor Screen for Broilmaster size 4 grill head. Flavor Screen is designed as an alternative to briquettes in your grill. MORE...

 
$120.69
31
B100448 Broilmaster Bolt Bag, Complete, Fits P3/P4 LP (B076523) MORE...
 
$51.68
32
B662325 Space Lid Stop, Fits All Models MORE...
 
$3.35
33
B905048 Stabilizer Bracket, Fits All Carts MORE...
 
$6.50
34
B101757 Burner bracket, sold as part # DPP118 that includes bolt, screw, nut and cotter pin, not shown in photo. Fits Q3X (all), and P3X, H3X, P4X, H4X with the igniter collector box attached to the burner.

Note: Part B101757 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B101648
MORE...

 
$14.56
99
B053585 Hugga-Rack Rotisserie kit, turns standard Rotisserie into Hugga-Rack.
  • Does not pierce meat. Clamps for the retention of juices
  • Fits P3/D3 and P4/D4 grills. Complete rotisserie set
  • Contains: grid backets, hugga-rack grids, spit rod, center frame, hardware.Does not include rotisserie motor MORE...
 
$154.10
99
B055268 Hose and Regulator w/ Q.C.C. one (1) male pipe fitting. Fits all LP models to 1998. MORE...

 
$29.48
99
B100006 Side Shelf Hardware, Fits P3/P4 MORE...
 
$9.34
99
BCK1000 Conversion Kit, LP to NATURAL GAS. Fits P3, P4, P3S, D3, D4. Includes:
  • Two (2) B069003 NG manifolds with orifices
  • One (1) conversion label B100033
  • Gas conversion instructions

Note: Part BCK1000 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B100243
MORE...

 
$38.30
99
BCK1001 Conversion Kit, Natural Gas to LP. Fits P3, P4, P3S, D3, D4. Includes:
  • Two (2) B069002 LP manifolds with orifices
  • One (1) conversion label B100273
  • Gas conversion instructions

Note: Part BCK1001 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B100239
MORE...

 
$38.30
99
BCK1002 Conversion Kit, LP to Natural Gas. Fits P3, P4, P3S, D3, D4. Includes:
  • Two (2) B069003 NG manifolds with orifices
  • One (1) NG12 12' Quick Disconnect Sturgis Hose Kit
  • NG hose has 3/8" inside diameter
  • One (1) conversion label B100033
  • Gas conversion instructions

Note: Part BCK1002 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B100244
MORE...

 
$108.67
99
BCK1003 Conversion Kit, natural gas to LP. Fits P3, P4, P3S, D3, D4. Includes:
  • Two (2) B069002 LP manifolds with orifices
  • One (1) B069756 LP hose and regulator
  • One (1) conversion label B100273
  • Gas conversion instructions

Note: Part BCK1003 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B100240
MORE...

 
$70.01
99
BCK1010 Conversion Kit, LP to Natural Gas. Fits P4X, H3X (P3X 2015 and newer) grill heads. Includes:
  • One (1) B101421 dual natural gas valve assembly
  • Two (2) P265 orifices #49 drill size
  • One (1) Conversion label NG B100033
  • Gas conversion instructions MORE...
 
$50.51
99
BCK1011 Conversion Kit, Natural Gas to LP gas. Fits P4X, H3X (P3X 2015 and newer) grill heads. Includes:
  • One (1) B069756 LP hose & regulator
  • One (1) B101420 dual LP valve assembly
  • Two (2) P182 orifices #55 drill size
  • One (1) Conversion label LP B100273
  • Gas conversion instructions MORE...
 
$78.12
99
DPA109 Deluxe black full-length cover for P, D, R, S, and T series grills with one stationary side shelf.
  • Broilmaster premium cover
  • Deluxe heavy duty PVC/Polyester material
  • Custom fitted for listed models
  • Top to bottom: 41"
  • Side to side: 54" (a little narrower at top)
  • Front to back - Top: 14"
  • Front to back - Bottom: 18" MORE...
 
$74.45
99
DPA110 Deluxe black full-length cover for P, D, R, S, and T series grills with two stationary side shelves.
  • Broilmaster premium cover
  • Deluxe heavy duty PVC/Polyester material
  • Custom fitted for listed models.
  • 40 3/8" tall
  • 61 3/8in side-to-side
  • 21 1/2" front-to-back MORE...
 
$81.79
99
DPA51 Heavy Duty Traditional Rotisserie. Includes:
  • B100932 Rotisserie Motor
  • B100078 Motor Bracket (includes screws and wing nuts)
  • B076850 Meat Forks (1 pair)
  • B076849 Locator Sleeve (AKA spit rod bushing)
  • B076851 Spit rod
  • B076854 Spit rod handle and thumbnut
  • B076852 Counter balance assembly. Replaces part# B076706.

Note: Part DPA51 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B076706
MORE...

 
$159.16
99
DPA8 Deluxe black full-length cover for P, D, R, S, and T series grills with no stationary side shelves.
  • Broilmaster premium cover
  • Deluxe heavy duty PVC/Polyester material
  • Custom fitted for listed models. MORE...
 
$71.08
?
45887 Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks. MORE...
 
$24.95
?
CLA-AC0394 High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2" apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15" x 24".
  • Top quality product
  • Each briquette measure 2" x 2"
  • Self cleaning
  • Great heat distibution, retains heat longer
  • Can be used on all grills that use briquettes or lava rock
  • Use a single layer (multiple layers can reduce temperatures)

NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.

  • 59 briquetes covers an area apprimately 15" x 24"
  • 70 briquetes covers an area apprimately 17" x 26"
  • 90 briquetes covers an area apprimately 17" x 33"
MORE...

 
$59.13
?
03750 20" Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$6.01
?
03751 Universal adapter wire with male round and female spade connectors.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$3.98
?
20502-725LR Cast iron burner and venturi assembly kit. Comes with all necessary gaskets and screws.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$111.57
?

DPP101-R Stainless steel bowtie burner and venturi assembly kit. Fits Broilmaster D3, P3, S3, U3 grill heads.

This burner is an exact duplicate of the original 21" OEM burner DPP101, and is made by the same manufacturer using the same materials as the original. The new official Broilmaster version of DPP101 is a 17" Bowtie burner MORE...

 
$133.36
?
BQ-3A BBQ'er choice porcelain grill briquets. The finest available.
  • Self-Cleaning Porcelain Briquettes.
  • Made of fired porcelain for even heat transfer.
  • Virtually indestructible.
  • About 56 pieces covers approximately 310 square inches.
  • Made in USA.
NOTE: MHP model TJK requires two (2) bags.
NOTE: This is an Aftermarket part, NOT an original factory part.

Note: Part BQ-3A is the factory authorized replacement for the following parts, which are no longer available:

  • BQ-5
MORE...

 
$50.28
?
CG-21SS Premium grade solid stainless steel grid with 1/4" rods. Sold individually, two (2) required.
NOTE: This is an Aftermarket part, NOT an original factory part.

Note: Part CG-21SS is the factory authorized replacement for the following parts, which are no longer available:

  • CG-21P
MORE...

 
$49.81
?
DHK-3 Gasket kit. Round gasket fits all dual cast iron bowtie burners.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$4.86
?
IG-5B Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20" wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$11.39
?
TG-1B Universal clip-on temperature gauge fits most grills. Find out if your grill is still hot at a glance.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$6.70
?
WDSB+DV-8 Cast iron bowtie burner and venturi assembly kit. Includes:
  • Cast iron burner
  • One (1) DV-8 twin venturi
  • All necessary gaskets and scews. MORE...
 
$144.11
?
45887 Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks. MORE...
 
$24.95
?
DPA116 Flare Busters Flat Ceramic Pads. For P3, T3, D3, H3. Package of 12. Each tile measures 7 1/4 " x 3 1/2". Used with B101061 rack. MORE...
 
$60.03
?
DPP116 Collector Box Kit - (Mounts to Burner). Includes collector box/electrode/connector wire, ground wire and screws. Does not include sleeve # B069743. Fits: P3X, P4X, H3X, H4X all Q3X 2012 with H burner. MORE...
 
$29.90
?
03500 36" wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$5.42
?
IG-18B 20" igniter wire with two (2) female spade connectors.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$4.93
?
03900 Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15" wire, and female round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only. Will NOT fit on cast iron burners.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$10.84
?
IG-5B Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20" wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$11.39
?
10502-725LR Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$75.00
?
62203 Cast iron "water fall style/multiple level" cooking grids (set of 3). Porcelain treated, glossy finish.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$226.10
?
93001 carbon steel rock grate
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$31.08
?
BG-14 Rock grate for holding lava rock or ceramic briquettes.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$31.08
?
CG-21SS-X2 Premium quality stainless steel "water fall" cooking grids. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.
  • Made in USA
  • 304 commercial grade stainless steel
  • .225 diameter solid stainless rods
  • Each panel measures 15 1/4" x 11"
  • Overall dimensions: 15 1/4" x 22"
.
NOTE: This is an Aftermarket part, NOT an original factory part.

Note: Part CG-21SS-X2 is the factory authorized replacement for the following parts, which are no longer available:

  • CG-21P
MORE...

 
$91.80
?
IG-15B Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$14.41
?
WDSB+DV-7 Cast iron bowtie burner and venturi assembly kit. Includes:
  • Cast iron burner
  • One (1) DV-7 twin venturi
  • All necessary gaskets and scews. MORE...
 
$143.26




Date built: Tuesday, May 12 2026