Grill model: Superb SBG2501

4

SBB00077 Warming Rack, Fits SBG2501 MORE...

5

SBB00064 Rotisserie Motor, fits SBG2501, SBG2801 MORE...

6

SBB00065 Rotisserie stainless steel standoff motor mounting bracket.

• 3" wide motor bracket
• 2 3/8" stand-off
• 1" center hole to center hole
• 15/16" width mount bracket MORE...

7

SBB00066 Rotisserie Rod, fits SBG2501 MORE...

8

SBB00068 Rotisserie Forks, fits SBG2501,SBG2801 MORE...

10

SBB00092 Jamb Nut, Fits SBG2501, SBG2801 MORE...

13

SBB00055-R Replacement for SBB00055, porcelain treated flat matte finish cast iron cooking grate, fits SBG2501. Sold individually, used in sets of two.
NOTE: Original version was cast iron. Later manufacturer replaced with stainless steel, which has been discontinued.
NOTE: This is an Aftermarket part, NOT an original factory part.

Note: Part SBB00055-R is the factory authorized replacement for the following parts, which are no longer available:

• SBB00055

MORE...

15

SBB00057 Rotisserie Burner Back Cover, fits SBG2501. MORE...

17

SBB00074 Rotisserie Orifice NAT, fits SBG2501 MORE...

18

SBB00059 Rotisserie Thermocouple, fits SBG2501, SBG2801 MORE...

25

SBB00051 Stainless steel tube burner. MORE...

28

SBB00031 Main Burner Orifice NAT, fits SBG2500, SBG2501, SBG2801 MORE...

30

SBB00038 Rotisserie Valve, fits SBG2501, SBG2801 MORE...

31

03342 Small AA battery powered push button spark generator.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8" mounting hole MORE...

32

SBB00035 Control Panel fits SBG2501 MORE...

34

25960 Universal control knobs, set of two knobs, includes eight (8) shaft inserts to accomodate valve stem diameters of approximately 5/6" and 1/4".

• Off position D-Value: 12 or 6 or 3 or 9 o'clock
• Knob diameter: 2 3/16"
• Insert socket diameters: 8.25mm (.32") and 6.10mm (.24")
• Knob shaft: Flat or 1"

Note: Part 25960 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:22002-96
• OMC:472-C501
• OMC:472-C552
• OMC:472-C555
• OMC:472-C562
• OMC:472-C565

MORE...

36

SBB00023 Cart Panel Left fits SBG2501, SBG2801 MORE...

37

SBB00025 Cart Back Panel fits SBG2500, SBG2501 MORE...

38

SBB00024 Cart Panel Right fits SBG2501, SBG2801 MORE...

39

SBB00029 Tank Ring, fits SBG2500, SBG2501, SBG2801 MORE...

40

SBB00027 Cart Cross Beam fits SBG2500, SBG2501 MORE...

41

SBB00010 Magnet, fits SBG2500, SBG 2501, SBG2801 MORE...

42

SBB00019 Cart Bottom fits SBG2500, SBG2501 MORE...

43

SBB00018 Caster fits SBG2500, SBG2501, SBG2801 MORE...

44

SBB00094 Lock Caster, Fits SBG2500, SBG2501, SBG2801 MORE...

45

SBB00009 Towl Holder, fits SBG2500, SBG 2501, SBG2801 MORE...

46

SBB00002 Door Assembly with Handle, Left, fits SBG2501 MORE...

47

SBB00005 Door Assembly with Handle, Right, fits SBG2501 MORE...

49

B069756 Hose and Regulator W/ Q.C.C. (female pipe fitting), fits all BRM LP models to 1999, SBG2500, 2501, 2801 MORE...

?

CTB1 Stainless steel burner.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

16

CLA-BS0211 Premium quality stainless steel tube burner.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...

?

SBB00098 Haardware Pack for SBG-2500/2501, fits SBG2500, SBG2501 MORE...

?

SBB00102 Stainless steel Flame Tamer , fits SBB2804

Note: Part SBB00102 is the factory authorized replacement for the following parts, which are no longer available:

• BM:SBB00053

MORE...