broilmaster-gasgrillparts.com logo

Grill model: H4XN

FREE Shipping over $79 PlayButton
Broilmaster grill

Genuine Broilmaster factory replacement parts


Here's the parts we have for model H4XN
Free USA shipping on orders $79 and over



2
TG-2B Universal bolt-on heat indicator replaces most factory installed indicators with 1 1/2" bolt centers. Stainless steel case.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$11.95

3
B070486 Stainless steel Handle (Handle Only) -- See B076793, Fits P4/D4.
Requires mounting bolt holes to be on 21 inch centers. The overall length of the handle is 22 1/4". When using this handle to replace the longer 24" handle, drilling new holes is required.

Note: Part B070486 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B100811
MORE...

 
$34.30

4
B073097 Foam Grip for S/S Handles, Fits P3, P4, P5. MORE...
 
$10.64

5
B072696 Stainless steel warming rack (Retract-A-Rack). Fits P4 and D4.

Note: Part B072696 is the factory authorized replacement for the following parts, which are no longer available:

  • B060757
MORE...

 
$56.36

6

B101492 Stainless steel single level cooking grids for H4 series grills. SET OF TWO (2) grids. MORE...

 
$107.84

8
B067449 Briquet Rack - This briquette rack is porcelain enameled steel rods; however, there have been times when the manufacturer made these in stainless steel without a price difference. Fits P4/D4. See partDPA117 for Ceramic Flare Busters. MORE...
 
$41.75

9

B101618 Burner and venturi assembly. Fits H4X series grills. Includes all necessary gaskets and screws. MORE...

 
$97.49

10

B063065 Radiation Shield (Heat & Wind Deflector), Fits All Models. MORE...

 
$40.30

11
B057805 Bridge Pin, Fits all models. MORE...
 
$1.71

12
B057804 Hinge Pin, Fits all models. MORE...
 
$1.71

13
DPA106 Adjustable Lid Stop Kit, All Models. Also replaces part #s B100421, B101231, B061281 and 061281.

Note: Part DPA106 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B076521
  • BM:B100421
  • BM:B101231
MORE...

 
$32.38

14
P312 ORIFICE 1.20MM fits H4X MORE...
 
$6.73

15
P245 Orifice MORE...
 
$4.68

16
B072218 Electronic ignitor head with two (2) male spade connectors. Fits 3/P4/P5/D3/D4
  • Uses 1 AA battery (not included)
  • Requires 7/8" mounting hole MORE...
 
$48.51

17
B101420 VALVE Assy - LP. Two orifices required based on model number. MORE...
 
$34.85

18
B101421 VALVE Assy - NAT. Two orifices required based on model number. MORE...
 
$34.85

19
B073963 Shelf Pin and Nut, Fits All Models MORE...
 
$3.35

20
B101515 Control Panel and Label Assy, Stainless Steel fits P4X MORE...
 
$74.07

20
B101518 Stick-on control panel label for D4, P4, and other size 4 grills.

Note: Part B101518 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B072197
MORE...

 
$17.27

21
B070084 Knob, Black (New Style), Fits P3/4/4, SR3, D3/4/5/2.
Also replaces part# B070286, which no longer available.
  • Off position D-Value: 3 o'clock
  • Knob diameter: 1 5/8"
  • Socket diameter: 5/16"
  • Knob shaft: 1/2"

Note: Part B070084 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B070286
MORE...

 
$10.64

23
B101621 CONTROL PANEL SHIELD MORE...
 
$10.64

24
B072684 Ground wire with female spade ends for battery-operated ignitors; 12" long. Fits All Electronic Models MORE...
 
$6.50

25
B069747 Ground Lug, Fits All Models MORE...
 
$3.21

26
B069743 Collector Box Spacer, Fits P 3/4 D 3/4/5

Note: Part B069743 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B069343
MORE...

 
$4.68

27
B100446 Collector Box (Electronic Ignitor), electrode, and connector wire with female spade end. Please refer to DPP116 Kit if ground wire needed and two screws; does include sleeve # B069743. Fits P3/P4

Note: Part B100446 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B072701
MORE...

 
$27.72

27
DPP158 Collector Box Kit - Fits P3X, P4X, H3X, H4X. Consist of collector box and electrode assembly, ground lug, ground wire and spacer.

Note: Part DPP158 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B072701
MORE...

 
$107.84

32
B069756 Hose and Regulator W/ Q.C.C. (female pipe fitting), fits all BRM LP models to 1999, SBG2500, 2501, 2801 MORE...

 
$33.61

34
B101757 Burner bracket, sold as part # DPP118 that includes bolt, screw, nut and cotter pin, not shown in photo. Fits Q3X (all), and P3X, H3X, P4X, H4X with the igniter collector box attached to the burner.

Note: Part B101757 is the factory authorized replacement for the following parts, which are no longer available:

  • BM:B101648
MORE...

 
$14.56

?
45887 Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks. MORE...
 
$24.95

?
TG-1B Universal clip-on temperature gauge fits most grills. Find out if your grill is still hot at a glance.
NOTE: This is an Aftermarket part, NOT an original factory part. MORE...
 
$6.70

?
DPA117 Flare Buster Flat Ceramic Pads; consist of ten pieces, three of which are different size pieces. For P4, H4, D4. Requires B067449 Rack if replacing flavor screen. MORE...
 
$75.17

?
DPP116 Collector Box Kit - (Mounts to Burner). Includes collector box/electrode/connector wire, ground wire and screws. Does not include sleeve # B069743. Fits: P3X, P4X, H3X, H4X all Q3X 2012 with H burner. MORE...
 
$29.90

?
BCK1012 Conversion Kit, LP to Natural Gas. Fits H4X grill heads. Includes:
  • One (1) B101421dual natural gas valve assembly
  • Two (2) P245 orifices #50 drill size
  • One (1) Conversion label NG B100033
  • Gas conversion instructions MORE...
 
$55.19

?
BCK1013 Conversion Kit, Natural Gas to LP. Fits H4X grill heads. Includes:
  • One (1) B069756 LP hose & regulator
  • One (1) B101420 dual LP valve assembly
  • Two (2) P312 orifices 1.20mm
  • One (1) Conversion label LP B100273
  • Gas conversion instructions MORE...
 
$75.17




Page date: November 3, 2026